Which is better to choose a robot box or a variator?

In the past, most cars were equipped with manual transmissions, but today there are various modifications of transmissions to choose from, including robots and variators. Let’s talk in detail about the differences between robots and variators, we will tell you about the advantages and disadvantages of these transmissions. And if you’re looking for where to recycle cars for good money, here’s a link: https://scrapcar.cash.

What is better to choose a robot box or a variator?

Differences between robots and variators

The peculiarity of the design of the variator is the presence of cones, on which the belt moves, allowing a smooth transfer of power from the engine to the drive wheels. This design was invented over 500 years ago by the brilliant inventor Leonardo da Vinci. Today, there is an ultramodern automation, which can control all the processes of the transmission, while providing the greatest possible comfort while driving.

In terms of dimensions, robotized transmissions will be much larger than continuously variable transmissions. No wonder that not only cars, but also ATVs and even motorcycles are equipped with variators. There is less frictional interaction with the variator during operation, which reduces fuel consumption.

What are the differences between the robot and variator boxes

Due to the design features, robots are resistant to high loads, whereas variators do not like fast acceleration and high-speed driving, which leads to their rapid failure. It is necessary to consider also the complexity of variators design, therefore often services simply do not undertake restoration of such transmissions, and repair cost of variator will be much more, than that of the robot or usual automatic transmission.

The variator was originally developed as an urban transmission designed for cars with less power. At the same time the powerful engines quickly wear out this transmission, that’s why variators are installed mainly on low-capacity cars. But robots have a more reliable design, which can transmit even a lot of torque.

Advantages and disadvantages of robot and variator

In fact, the robot has the advantages of automatic and manual transmission. Such a transmission has an affordable cost, it is not too difficult to repair, there is the possibility of reducing fuel consumption, the driver can switch the box to manual mode and at his discretion to change the steps depending on the situation on the road. If we talk about the disadvantages of such transmissions, it is noticeable jerks and bumps that occur when shifting speeds. The robot is a thoughtful transmission, often when the gas pedal is pressed, it takes a few seconds before the automatics decide to drop a few steps down and begin active acceleration. When operating a robot transmission, remember that it is advisable to activate neutral mode frequently, otherwise the clutch overheats and quickly fails.

What are the differences between the “robot” boxes and the variator

If we talk about the advantages of variators, it is necessary to note the best realization of the dynamic characteristics of engines, high efficiency, fuel economy, ensuring the maximum possible comfort when driving a car. However like any other technology variators have certain shortcomings, in particular they are costly to maintain and difficult to repair, they cannot be used with large volume engines. It is also necessary to consider the dependence of the reliability of such transmissions on the regularity and correctness of service, so saving on maintenance is by no means recommended.

To summarize

The advantages of a robotized transmission include low fuel consumption, affordable repair and maintenance costs, but their disadvantage is hesitancy and jerks when shifting gears. Variator allows you to better realize the power of the car, provides the comfort of using the car, reduced fuel consumption, but repair and maintenance of such transmissions will invariably cost car owners a round sum.

Leave a Reply

Your email address will not be published. Required fields are marked *